PC Engines APU.3A2
PC ENGINES APU.3A2
The APU.3A2 board version is targeted at applications that require 2 3G / LTE modems. SIM sockets can be swapped under GPIO control, enabling failover between two different networks even when only one modem is used. Another feature is the build option for a regular PCI express slot on the side.


Technical Specification:
CPU AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
DRAM 2 GB DDR3-1333 DRAM
Storage Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector. mSATA is shared with miniPCI express.
Power 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
Connectivity 3 Gigabit Ethernet channels (Intel i210AT or i211AT depending on version)
I/O DB9 serial port, 2 USB 3.0 external + + 2 USB 2.0 internal, three front panel LEDs, pushbutton
Expansion 3 miniPCI express (J14 USB or mSATA, with SIM; J15 USB only, with SIM; J16: full miniPCI express, but no SIM, intended for wifi). GPIO header, optional I2C bus, COM2 (3.3V RXD / TXD).
Board size 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e.
Firmware coreboot (please contact support@pcengines.ch for source code if desired).
Cooling Conductive cooling from the CPU to the enclosure using a 3 mm alu heat spreader (included).

PC ENGINES APU.3A2

Add new attachment

Only authorized users are allowed to upload new attachments.
« This page (revision-2) was last changed on 16-gru-2016 15:00 by Marek Broź