Metal 5SHPn

The new, completely waterproof, rugged, and super high powered RouterBOARD Metal. The serious outdoor wireless device.

Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. 1.3 WATT of output power - to reach the last mile, in any conditions.

It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

Package contains Metal-5SHPn, mounting loops, PoE injector, power adapter

Technical Specification: #

CPU Atheros AR7241 400MHz network processor
Memory 64MB DDR SDRAM onboard memory
Ethernet One 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X, L2MTU up to 2030
Wireless Wireless Built-in 5GHz 802.11a/n 1x1 MIMO,
N-male connector, Up to 1.3W output power
Extras Reset switch, Beeper, Voltage monitor, Temperature monitor
LEDs 5 wireless signal LEDs, ethernet activity LED (configurable)
Power options Passive 8-30V PoE only. 16KV ESD protection on RF port
Consumption Up to ~0,5A at 24V (11.5W)
Dimensions 177x44x44mm, 193g. Must be mounted with ethernet pointing down
Operating temperature -30C to +70C
Operating system MikroTik RouterOS v5, Level4 license (station, point-to-point or AP modes)
Package contains Metal 5SHPn unit, mounting loops, PoE injector, 24V power adapter
RX sensitivity 802.11a: -93 dBm @ 6Mbps to -77 dBm @ 54 Mbps
802.11n: -93 dBm @ MCS0 to -71 dBm @ MCS7
TX power 802.11a: 31dBm @ 6Mbps to 27dBm @ 54 Mbps
802.11n: 30dBm @ MCS0 to 26dBm @ MCS7
Modulations OFDM: BPSK, QPSK, 16 QAM, 64QAM
DSSS: DBPSK, DQPSK, CCK

Add new attachment

Only authorized users are allowed to upload new attachments.

List of attachments

Kind Attachment Name Size Version Date Modified Author Change note
jpg
Metal_5SHPn.jpg 14,5 kB 2 01-cze-2012 14:34 Andrzej Bober
« This page (revision-3) was last changed on 01-cze-2012 14:30 by Andrzej Bober