ISCOM-2110A-MA-PWR L2 Managed POE Switch Complied with IEEE802.3af#

ISCOM2110A-MA-PWR




ISCOM2110A-MA-PWR4 is a PoE (Power over Ethernet) device complied with IEEE802.3af and RCF3621. As a Power Source Equipment, ISCOM2110A-MA-PWR4 is deployed at the Ethernet access layer in small/medium enterprise, residential area, campus, etc. Providing 4 ports (port 1-4) as PSE power port, it can offer power supply for PD devices like wireless Access Point, IP phone and surveillance camera.

As a L2 switch, ISCOM2110A-MA-PWR4 also provides cost-effective L2 aggregation with carrier grade reliability, supports metro access standards, basic 802.3ah OAM discovery, 802.3ag CFM, and SLA for Carrier Ethernet services.

Feature#

  • PoE: 4PoE ports (port 1~4); port max power config (max value 15.4W, least value 4W); critical, high, low priority; auto/manual electricity management Overheating protection; complied with IEEE802.3af and RFC3621
  • MTU: 1632byte
  • Ingress/egress-per port rate-limit, based on ethertype/Queue
  • Broadcas/Multicast/Unicast DLF storm control
  • Link aggregation: up to 4 groups, and up to 8 ports in each group; support load balance based on CRC harsh value of MAC address
  • Mirroring: N:1 port mirroring and mirroring per VLAN, seperate ingress/egress direction
  • IEEE802.1Q VLAN, 4K active VLANs, 8K MAC address
  • Port QinQ
  • 1K multicast address, static multicast group, IGMP Snooping V1/V2/V3, multicast filtering, MVR
  • STP, RSTP&MSTP; 64 instances
  • IEEE802.3x in full duplex mode; Back pressure in half duplex mode
  • L2TP: BPDU; DOT1X; LACP
  • SFP digital diagnostic
  • Port Loopback Detection; Port Backup
  • Ethernet ring: max 8 ethernet rings, max 124 devices in each ring
  • Lightning proof
  • System management: CLI/Telnet/Console/SSHv2/RMON Group 1,2,3 & 9/SNMP/Bridge MIB(RFC1493)/Raisecom NMS/System log/Cluster management
  • DHCP Server/Client/Snooping/Option82
  • IEEE802.3ah OAM; Extended OAM
  • IEEE802.1ag CFM, Y.1731 protocol; support 256 MEP, 256 MA
  • Layer-2/layer-3 SLA
  • QoS: 4 queues per port; SP/WRR/SP+WRR
  • RADIUS
  • TACAS+
  • Port protection
  • PPPoE Agent
  • DOT1X

Specification#

  • Switching fabric 5.6Gbps; 32MB SDRAM, 4MB flash, 128KB Switch buffer
  • 8*10/100Base-T ports ( 1~4: PoE PSE ports), 2*1000Base-X SFP
  • Dimension 43.6(H)*300(W)*220(D)mm
  • Weight<2.1Kg
  • Power<90W
  • Power supply: AC: 90~264V, 47~63Hz; DC: 36~72V
  • Working ambience: Temp: 0~50 centigrade; RH: 10~90% non-condensing





Add new attachment

Only authorized users are allowed to upload new attachments.

List of attachments

Kind Attachment Name Size Version Date Modified Author Change note
jpg
2110a-ma-pwr.jpg 13,3 kB 3 14-cze-2010 13:10 ABober
« This page (revision-2) was last changed on 14-cze-2010 13:08 by ABober